Importing Compressed Gas in Cylinders

Imported compressed gas should be declared as a separate line item from the cylinder in which it is contained.

If you are importing a compressed gas (like an oxygen bottle) in a reusable cylinder and need to identify it for import purposes (e.g. on a CBP Form 7501), then you typically will need to declare the gas and the cylinder as two separate line items on the entry declaration.

One reason for this is found in the the HTSUS General Rules of Interpretation, which explains:

5. In addition to the foregoing provisions, the following rules shall apply in respect of the goods referred to therein:
(a) Camera cases, musical instrument cases, gun cases, drawing instrument cases, necklace cases and similar containers,specially shaped or fitted to contain a specific article or set of articles, suitable for long-term use and entered with the articles for which they are intended, shall be classified with such articles when of a kind normally sold therewith. This rule does not,however, apply to containers which give the whole its essential character;
(b) Subject to the provisions of rule 5(a) above, packing materials and packing containers entered with the goods therein shall be classified with the goods if they are of a kind normally used for packing such goods. However, this provision is not binding when such packing materials or packing containers are clearly suitable for repetitive use.

Normally, packaging would be merged into the entry for the material contained in the packaging, but for packaging susceptible to multiple uses (“clearly suitable for repetitive use”), that sort of packaging needs to be declared as a separate line item on the import entry.

This issue was addressed in a 2002 Customs Ruling, which involved a reusable steel gas cylinder containing carbon dioxide. The ruling explained that the carbon dioxide must be declared on import (in that case it was identified as HTSUS 2811.21.000) and the reusable steel gas cylinder also needed to be declared as part of the entry (in that case it was identified as HTSUS 7311.00.0090). There is a later ruling that supports this conclusion in a slightly different context: a 2016 Customs Ruling explains that the canisters in which a fire extinguishing agent was contained were to be declared separately from the contained chemical agent.

Today, steel cylinders for compressed gasses will be identified as 7311.00.00xx, where the last two digits depend on the configuration:

• 7311.00.0030: a steel cylinder certified under the US DOT hazmat rules (Title 49 Part 178) and marked with DOT 3A, 3AX, 3AA, 3AAX, 3B, 3E, 3HT, 3T or DOT-E (including the specific exemption number);
• 7311.00.0060: a steel cylinder certified under the US DOT hazmat rules (Title 49 Part 178) and but NOT marked according to the standards, above (for example, this could include a DOT 4D cylinder, as found in certain aircraft oxygen bottles);
• 7311.00.0090: a steel cylinder that is NOT certified under the US DOT hazmat rules.

Aluminum cylinders for compressed gasses will be identified as HTSUS 7613.00.0000.

Some typical gasses (and their HTSUS tariff codes) that might be imported in aviation include:

• 2804.30.0000: Nitrogen
• 2804.40.0000: Oxygen
• 2811.21.0000: Carbon Dioxide

It is important to identify your import with the right tariff code so that it will be subject to the right duties. The tariffs listed above all typically have a non-zero duty attached to them, and the cylinder and the gas may each have different duty rates associated with them.